Tool AT-W50REV. 2026-A
Click potential calculator: which search terms bring more visitors for little effort?
One position higher brings more clicks, even if nothing about the listing changes. The tool calculates how many from your Search Console export: impressions times the difference between the expected click-through rate at the target position and your current one. It also shows the terms just off page 1 and those where the title or description costs you clicks. The file stays in your browser.
- free
- no sign-up
- File stays in the browser
01 / CALCULATOR
Load the export, choose a target, read off the potential
Calculator · Click potential from Search Console
An estimate, not a promise: the curve is an average over many searches, and how many clicks a given position brings depends heavily on the results page. The tool shows where work is most likely to pay off, not how many visitors will definitely come.
Step 1Load the Search Console export
Paste a table instead of a file
Where to find the export: Search Console → Performance → Search results → Export → Download CSV. Switch on all four metrics first. The steps are further down the page.
Calculations are performed in your browser. The file is not uploaded, sent or stored.
02 / CALCULATION
How the click potential calculator works
The calculation is simple and shown openly. For every row of your export: extra clicks = impressions × (expected click-through rate at the target position − current click-through rate). A term with 1,000 impressions at position 12 and 3 clicks has a click-through rate of 0.3 % today. At position 3 the industry curve expects 6.02 %. That gives 1,000 × (6.02 % − 0.3 %) = roughly 57 more clicks in three months, just over 19 a month.
If a row is already at the target position or better, it counts as zero. The same applies if its click-through rate is already above the curve value at the target; there are no negative extra clicks. Moving up is also worthwhile within page 1: 1,000 impressions at position 7 with a 2 % click-through rate would bring roughly 40 more clicks at position 3.
| Position | without brand | with brand | Sistrix, mobile |
|---|---|---|---|
| 1 | 19,38 % | 27,32 % | 28,5 % |
| 2 | 9,64 % | 16,93 % | 15,7 % |
| 3 | 6,02 % | 12,75 % | 11,0 % |
| 4 | 3,88 % | 10,23 % | – |
| 5 | 2,68 % | 7,91 % | – |
| 6 | 1,86 % | 6,12 % | – |
| 7 | 1,37 % | 5,12 % | – |
| 8 | 1,10 % | 4,40 % | – |
| 9 | 0,94 % | 4,02 % | – |
| 10 | 0,81 % | 4,04 % | 2,5 % |
Where the curve comes from, and why it is adjusted
We have not found a current, peer-reviewed curve for Google search; the studies on position effects work with laboratory experiments or with the search engines' own logs. The calculator therefore uses a large industry analysis as its basis: the curve without brand names from Advanced Web Ranking, measured on over 1.75 million US results pages a month. It is a starting point, not a law of nature. Other analyses arrive at very different values, see the table, and the values shift over time: position 2 lost around 40 per cent of its click-through rate there between 2015 and 2025, position 3 around 44 per cent.
How strong the position effect is in a particular setting can be estimated from ordinary click data Wang et al. 2018, and such estimates differ from system to system Agarwal et al. 2019. That is why the calculator adjusts the curve to your data as soon as there is enough (at least 500 impressions from 10 rows on page 1, without brand). It counts the clicks your page 1 rows received and divides them by the clicks the curve expects for the same rows. If you received 730 clicks where the curve expects 1,000, it calculates with a factor of 0.7. The shape of the curve stays; only its height adjusts.
Brand terms do not belong in this: people who search for your name almost always click on you, and even a few such rows would push the factor up. Enter your company name in the brand terms field for that reason. And if you have a curve of your own, from an earlier analysis or another tool, enter it yourself under “View the curve”.
Open assumptions
- US data, all devices mixed. There is no comparably large, openly documented curve for Germany. On mobile, position 1 in the same analysis is clearly higher than on desktop.
- The curve ends at position 10. For page 2 the industry data provide no reliable expectation; Sistrix gives values well below 1 % per position there. Terms beyond position 10 therefore get a potential at the target position, but no outlier check.
- Impressions stay the same. Google only counts an impression if the result was actually loaded. Anyone on page 2 is not counted at all in many searches; there the potential is more likely underestimated.
- A position is an average. The average position blends all impressions. A term at 4.0 can always be at position 4 or alternate between 1 and 7.
03 / DATA
What Search Console counts and what it leaves out
If you calculate with the export, you should know how Google collects the figures. The definitions below come from the Search Console Help, read on 14 November 2026; the links are under “Studies and sources”.
| Term | What Google means by it | Consequence for the calculation |
|---|---|---|
| Impression | A link to your website was shown in search (or could have been seen). Results on a page 2 that was not loaded do not count; in carousels the item must be scrolled into view. | Basis of the calculation. On page 2 it understates demand. |
| Click | Every click that leads from Google search to a page outside Google. | Together with impressions this gives the click-through rate. The calculator uses the exact figures for this, not the rounded CTR column. |
| CTR | Clicks ÷ impressions. | Compared with the expectation at the same position. |
| Position | The highest position of a link to your website, averaged over all searches in which it appeared. In the pages table it applies per page, in the queries table to the whole website. | Determines the curve value, linear in between. An average, not a fixed position. |
| Anonymised queries | Google leaves very rare queries out of the table for privacy reasons; they count in the overall total above the chart. | The sum of the rows is smaller than the overall total. This changes little for the ranking of the big terms. |
| 1,000 rows | The tables show at most 1,000 rows; Google only stores the top rows anyway. | The calculator points this out if a file has exactly 1,000 rows. More is available through the API or the bulk export. |
| Delay | Data is usually available after 2 to 3 days; the most recent days are provisional. Days count in California time. | Better not to calculate for the last few days; periods of 28 days or more fluctuate less. |
Source: Google Search Console Help (answer 7042828, 7576553, 96568, 17010575), as of 14 November 2026.
04 / POSITION EFFECT
Why position matters so much
The fact that the top gets more clicks is not only because the better results are at the top. In an eye-tracking study on the Google results page, users looked at position 1 and position 2 for almost the same length of time, but clicked position 1 clearly more often; after position 2 attention fell steeply, and after position 10 it collapsed Granka et al. 2004. When the researchers secretly swapped the first two results, participants still preferred to click at the top, even when the second result matched better Joachims et al. 2005. With the order reversed they did check for longer, but still chose mostly from the upper half Pan et al. 2007.
That is the reason the calculator may work with a curve at all: the position itself brings clicks, regardless of the listing. Further down page 1 people hardly look any more. When the result they wanted was lower, they needed longer and found it less often Guan and Cutrell 2007. A simple picture explains it best: you read from top to bottom and stop at the first matching hit Craswell et al. 2008.
Click models in search research therefore split a click-through rate into two parts: whether a listing is looked at at all, which depends mainly on position, and whether it then attracts and delivers what it promises Chapelle and Zhang 2009. This very separation is built into the calculator. The potential at the target position is the part a better position brings. The outlier list shows the other part, the listing itself.
On mobile the gap is larger
On a phone usually only three to four results fit on the screen, and attention lies mainly in the upper half Lagun et al. 2014. On small screens users found it harder to evaluate the results page, and they scrolled less often Kim et al. 2015. The industry curve mixes all devices. If your visitors come mainly from mobile, the top three positions are worth even more to you than the calculator shows.
05 / OUTLIERS
When the click-through rate does not match the position
Besides position, presentation decides. In experiments in Google web search, listings with more appealing titles got more clicks, regardless of how well they matched Yue et al. 2010. Even simple features count: whether all search words appear, how readable the short text is and how long the displayed address is Clarke et al. 2007. A row that gets conspicuously few clicks for its position is therefore first a case for the title and description.
In the calculator, flagged means: even the upper limit of the 95 % confidence interval of the measured click-through rate is below half of the curve value. This interval is calculated by the Wilson method, because the usual method is unreliable with small numbers Brown et al. 2001. So a row with 40 impressions and zero clicks is not flagged straight away, while one with 1,500 impressions and 2 clicks at position 2 certainly is. Half is our own setting; it separates clear cases from ordinary scatter. Conversely, the calculator counts rows that are more than twice the expected value.
Before you rewrite: three counter-questions
- Does Google already answer the question itself? Many searches without a click end satisfactorily because the answer is on the results page, clearly more often on mobile than on a PC Li et al. 2009. For “opening hours”, “phone number” or short facts, a low click-through rate is normal.
- What is above you? Ads, map blocks and product strips draw attention away; how much the normal results still get also depends on the ads above them Buscher et al. 2010. Search for the term yourself, preferably on a phone.
- Does the page match the intent? More text in the short description helped with informational questions and hurt when searching for a specific website Cutrell and Guan 2007. Anyone searching for “get a heating system repaired” wants a firm, not a guide.
If it is still a weak listing, rebuild the title and description in the snippet preview. There you can see where Google truncates, and whether the search term comes first. Google does often rewrite titles itself, though; check after a few weeks what is actually displayed.
06 / EXPORT
How to get the Search Console export
- Open the performance report. In Search Console, “Performance” on the left and then “Search results”.
- Choose metrics and period. Switch on all four tiles at the top (clicks, impressions, average CTR, average position). The last 3 months are a suitable period; you set the chosen period in the calculator in the same way.
- Export. At the top right “Export” and “Download CSV”. You get a ZIP archive.
- Unzip. The ZIP holds one file per tab. For the calculator you need the one with the queries (in English Queries.csv) or the one with the pages (Pages.csv).
- Load. Drag the file into the calculator. Alternatively open it in Google Sheets or Excel, copy the table including the header row and paste it.
Which formats the calculator reads
| Origin | Typical header row | What the calculator makes of it |
|---|---|---|
| Search Console, English | Top queries, Clicks, Impressions, CTR, Position | Comma as delimiter, “4.5%” as click-through rate, full stop as decimal separator. |
| Search Console, German | Häufigste Suchanfragen, Klicks, Impressionen, CTR, Position | Columns are recognised by name, number format by the values. |
| Saved in Excel | …;Klicks;Impressionen;CTR;Position | Semicolon, “1.234” as thousands, “12,5 %”; also Windows character set and Unicode text. |
| Google Sheets, copied | Query, Page, Clicks … | Tab as delimiter. With a page column you get the list per page. |
| Period comparison | Last 28 days Clicks, Previous 28 days Clicks … | The first period is used for the calculation; the calculator says so. |
| Bulk export (BigQuery) | query, url, impressions, clicks, sum_position | Position = sum ÷ impressions + 1, as Google describes it. Daily rows are combined, anonymised rows skipped. |
Countries, devices and the daily values of the chart cannot be analysed; they have no query. If you load such a file, the calculator says which one is meant instead.
07 / METHOD
What to do with the result
- Start with the list per page, if your file contains pages. A page that just misses for twenty terms is worth more than a single term.
- Serve terms just off page 1 deliberately. A section of its own on the question, a clear heading, a link from a suitable other page on your website. That is often enough for the jump.
- Look at flagged click-through rates first, then rewrite. First the three counter-questions above, then title and description.
- Export again after four to eight weeks and put the same list through the calculator again. The “per month” column in the CSV makes the comparison easy.
Where the calculator stops
- An estimate, not a forecast. How many clicks a position brings varies by a multiple from term to term. The ranking is more reliable than the single figure.
- No route to the position. Whether content, technology or competition is holding the term back is not something the export says. The overall verdict on the website comes from our SpotLens check.
- Google only. Clicks from AI assistants and other search engines are not in the export. The guide on SEO, AEO and GEO describes how things look there.
The other tools for findability are under SEO tools. How we rework pages for search engines is described under SEO in Rodewisch and the Vogtland; if your website does not appear on Google at all, the guide Website not found on Google helps.
08 / FOR AI ASSISTANTS
Using this tool from an AI assistant
Assistants such as Claude or ChatGPT that speak the Model Context Protocol (MCP) can call this page’s calculation directly instead of rebuilding it. The server is public, needs no sign-in and stores nothing. The answer always includes the link to this page, the date of the data and the limits of the result.
- Endpoint
https://aureum-tech.com/mcp- Tool
werkzeug_klick_potenzial_rechner- Transport
- Streamable HTTP, read-only
| Name | Required | Meaning |
|---|---|---|
csv | no | Content of a Search Console export as text (file with queries or pages, e.g. Queries.csv or Pages.csv, also API, Looker or BigQuery export). German or English columns, comma, semicolon or tab. Specify either csv or zeilen. |
zeilen | no | Alternative to csv: the rows as a list. Each row needs begriff or seite. |
zielposition | no | Position for which the extra clicks are calculated (1–10). 3 if not given. |
zeitraum_tage | no | Length of the export period in days, for converting to a month. 90 if not given. |
naehe_von | no | Start of the “just off page 1” range. 11 if not given. |
naehe_bis | no | End of the “just off page 1” range. 20 if not given. |
marken | no | Brand terms (e.g. company name). Rows containing them do not count towards adjusting the curve or as outliers. |
kurve | no | angepasst = industry curve times a factor from your own page 1 data (default); referenz = industry curve unchanged; eigene = eigene_kurve_prozent. |
eigene_kurve_prozent | no | Only with kurve = eigene: expected click-through rate in per cent for positions 1 to 10. |
anzahl | no | Maximum number of entries per list. 20 if not given. |
Questions where an assistant should call it
- “Here is my Search Console export: which search terms bring the most if I get them to position 3?”
- “Which of my terms are just off page 1 and worth the effort?”
- “For which search queries is my click-through rate too low for the position?”
- “How many clicks a month would there be if my pages were at position 1?”
How the connection works and what MCP can do in your own business is explained on the page about MCP integrations.
09 / COMMON QUESTIONS
Common questions about click-through rate, position and Search Console
How many clicks does position 1 on Google get?
On average clearly more than any other position, but less than is often claimed. In the Advanced Web Ranking analysis (Google US, all devices, July 2026), position 1 received 19.4 % of impressions as clicks for searches without a brand name, position 2 9.6 % and position 3 6.0 %. For brand searches it was position 1 27.3 %. In 2020 Sistrix found 28.5 % on mobile. What it is for you depends on the results page: ads, map blocks and answer boxes push the figures down sharply.
What is a good click-through rate in Search Console?
It depends almost entirely on the position. A click-through rate of 3 per cent is weak at position 1 and good at position 6; the industry curve lists position 6 1.9 %. The calculator therefore compares each row with the expectation at its own position and only flags rows that are clearly below it even allowing for random variation.
What does the average position in Search Console mean?
For each search, Google counts the highest position at which your website appears, and averages these positions over all impressions. If you appear at positions 2, 4 and 6 in one search and at position 3 in another, the result is (2 + 3) ÷ 2 = 2.5. A position of 5.5 can therefore mean that a term was sometimes at position 1 and sometimes at position 10.
Why are search queries missing from the export, and why don't the totals match?
To protect users, Google leaves out queries that are very rarely made; they still count in the total above the chart. The interface also shows and exports at most 1,000 rows. The sum of the rows is therefore almost always smaller than the overall total. To decide where work pays off, the top 1,000 rows are usually enough.
How do I get search queries together with the page?
The normal export delivers queries and pages in separate files. Both together are available through the Search Console API, Looker Studio or the bulk export to BigQuery. If the file has one column for the query and one for the page, the calculator also summarises the potential per page. It combines daily rows itself.
What does “just off page 1” mean, and what do I do with such terms?
This means terms with an average position of 11 to 20. Google already considers your page relevant there, but not yet the best. Usually it helps to answer the term on the page specifically (a section of its own, a clear heading) and to link to it from other pages on your website. You can change the range in the calculator.
Is my Search Console data uploaded?
No. The file is read and calculated in your browser; nothing goes to our server or to third parties. The CSV export is also created in the browser.
Where does the click potential calculator stop?
It estimates how many clicks a better position would bring and shows where the click-through rate does not match the position. It does not tell you how to reach that position: whether the content is good enough, whether the technology is holding you back or whether other pages on your website stand in the way of the term. We check that with you, and our SpotLens check gives the overall verdict on the website.
10 / STUDIES AND SOURCES
What the tool is based on
The guide values and notes above are based on these 16 scientific papers. Each has been checked via its DOI or the publisher's page (most recently on 14 November 2026): it exists, it has not been retracted, and its finding still holds for the question today.
Granka, L. A.; Joachims, T.; Gay, G. (2004): Eye-tracking analysis of user behavior in WWW search. Proceedings of the 27th ACM SIGIR Conference, pp. 478–479
Finding Eye-tracking on the Google results page: results at positions 1 and 2 are looked at for almost the same length of time, but position 1 is clicked clearly more often. After position 2 attention drops sharply, and after position 10 it collapses because the page ends there.
In the tool Accounts for the steep shape of the curve and for why it ends at position 10: hardly anyone sees page 2.
doi.org/10.1145/1008992.1009079 · Conference paper
Joachims, T.; Granka, L.; Pan, B. et al. (2005): Accurately interpreting clickthrough data as implicit feedback. Proceedings of the 28th ACM SIGIR Conference, pp. 154–161
Finding Clicks say something about relevance, but they are biased. If the first two results are swapped, users still click position 1 more often, even when the second result matches better (“trust bias”).
In the tool Supports the calculator's basic assumption: a better position brings more clicks, even for the same result.
doi.org/10.1145/1076034.1076063 · Conference paper
Pan, B.; Hembrooke, H.; Joachims, T. et al. (2007): In Google We Trust: Users' Decisions on Rank, Position, and Relevance. Journal of Computer-Mediated Communication 12 (3), pp. 801–823
Finding In eye-tracking, students preferred higher-placed results, even when their short text was less relevant. With the order reversed they checked for longer, but still chose mostly from the upper half.
In the tool A second piece of evidence that the position itself generates clicks; this is why the tool calculates extra clicks from a position curve.
doi.org/10.1111/j.1083-6101.2007.00351.x · Journal article
Guan, Z.; Cutrell, E. (2007): An eye tracking study of the effect of target rank on web search. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems (CHI 2007), pp. 417–420
Finding When the result they wanted was further down page 1, users searched for longer and found it less often; they hardly looked at results further down. For informational questions the effect was stronger than when searching for a specific website.
In the tool Explains why even a jump within page 1 (for example from position 7 to position 3) brings a lot.
doi.org/10.1145/1240624.1240691 · Conference paper
Craswell, N.; Zoeter, O.; Taylor, M. et al. (2008): An experimental comparison of click position-bias models. Proceedings of the 2008 International Conference on Web Search and Data Mining (WSDM '08), from p. 87
Finding Using swapped rankings in a large search engine, four explanations for the position effect were compared. The cascade model fitted best: users read from top to bottom and stop at the first matching result.
In the tool Explains in the text why the curve falls so steeply at the top and why it looks different for every results page.
doi.org/10.1145/1341531.1341545 · Conference paper
Chapelle, O.; Zhang, Y. (2009): A dynamic bayesian network click model for web search ranking. Proceedings of the 18th International Conference on World Wide Web (WWW 2009), pp. 1–10
Finding Addresses further down are clicked less often, even when they are relevant. The model separates whether a result is looked at, whether it attracts and whether it satisfies the user, and predicts click-through rates better than earlier models.
In the tool Basis for the split in the text: click-through rate equals the attention of the position times the appeal of the listing; this leads to the separation of rank potential and snippet potential.
doi.org/10.1145/1526709.1526711 · Conference paper
Wang, X.; Golbandi, N.; Bendersky, M. et al. (2018): Position Bias Estimation for Unbiased Learning to Rank in Personal Search. Proceedings of the 11th ACM International Conference on Web Search and Data Mining (WSDM 2018), pp. 610–618
Finding The position effect can be estimated from ordinary click data, without randomly rearranging results; rearranging made search worse there. The estimated values improved the ranking markedly.
In the tool Justifies the default of adjusting the curve to your own click data instead of blindly adopting someone else's curve.
doi.org/10.1145/3159652.3159732 · Conference paper
Agarwal, A.; Zaitsev, I.; Wang, X. et al. (2019): Estimating Position Bias without Intrusive Interventions. Proceedings of the 12th ACM International Conference on Web Search and Data Mining (WSDM 2019), pp. 474–482
Finding An estimation method derives the position effect from the logs of different rankings and gave better values than earlier methods in two real search systems (Arxiv full-text search, Google Drive search).
In the tool Supports, together with Wang 2018, that every search has its own curve; the calculator therefore states its adjustment factor openly.
doi.org/10.1145/3289600.3291017 · Conference paper
Yue, Y.; Patel, R.; Roehrig, H. (2010): Beyond position bias: examining result attractiveness as a source of presentation bias in clickthrough data. Proceedings of the 19th International Conference on World Wide Web (WWW 2010), pp. 1011–1018
Finding Besides position, presentation also distorts clicks: in experiments in Google web search, results with more appealing titles got more clicks, regardless of their relevance.
In the tool Justifies the outlier list: a click-through rate far below expectation points first to the title and description, hence the route to the snippet preview.
doi.org/10.1145/1772690.1772793 · Conference paper
Clarke, C. L. A.; Agichtein, E.; Dumais, S. et al. (2007): The influence of caption features on clickthrough patterns in web search. Proceedings of the 30th ACM SIGIR Conference, pp. 135–142
Finding Click logs from a large search engine show that even simple features of a listing clearly influence click behaviour, such as whether all search words appear, how readable the short text is and how long the displayed address is.
In the tool Supplies the checkpoints for flagged rows: search term in the title, understandable description, short address.
doi.org/10.1145/1277741.1277767 · Conference paper
Cutrell, E.; Guan, Z. (2007): What are you looking for? An eye-tracking study of information usage in web search. Proceedings of the SIGCHI Conference on Human Factors in Computing Systems (CHI 2007), pp. 407–416
Finding More content in the short text helped with informational questions, but hurt when searching for a specific website.
In the tool This is why the calculator gives no one-size-fits-all rule for outliers: whether a longer description helps depends on the search intent.
doi.org/10.1145/1240624.1240690 · Conference paper
Kim, J.; Thomas, P.; Sankaranarayana, R. et al. (2015): Eye-tracking analysis of user behavior and performance in web search on large and small screens. Journal of the Association for Information Science and Technology 66 (3), pp. 526–544
Finding On the small screen users found it harder to draw information from the results page, and they scrolled less often; time and accuracy did not differ significantly, however.
In the tool Justifies the note that the curve runs differently on mobile and that a mixed curve across all devices is only an average.
doi.org/10.1002/asi.23187 · Journal article
Lagun, D.; Hsieh, C.-H.; Webster, D. et al. (2014): Towards better measurement of attention and satisfaction in mobile search. Proceedings of the 37th ACM SIGIR Conference, pp. 113–122
Finding On mobile the screen usually shows only three to four results, and attention lies mainly in the upper half of the screen. Answers directly on the results page often get no click, even though they solve the question.
In the tool Explains in the text why positions 1 to 3 matter even more on mobile and why a low click-through rate does not always mean a bad listing.
doi.org/10.1145/2600428.2609631 · Conference paper
Li, J.; Huffman, S.; Tokuda, A. (2009): Good abandonment in mobile and PC internet search. Proceedings of the 32nd ACM SIGIR Conference, pp. 43–50
Finding A considerable share of searches without a click end satisfactorily because the results page already answers the question; clearly more often on mobile than on a PC, in all three language areas studied.
In the tool This is why, for outliers, the calculator first names the question of whether Google shows the answer itself, before it advises rewriting.
doi.org/10.1145/1571941.1571951 · Conference paper
Buscher, G.; Dumais, S. T.; Cutrell, E. (2010): The good, the bad, and the random: an eye-tracking study of ad quality in web search. Proceedings of the 33rd ACM SIGIR Conference, pp. 42–49
Finding How much attention the normal results get depended on the type of task and on the quality of the ads above them.
In the tool Supports the note that ads and other elements above the results can push the curve down strongly for individual terms.
doi.org/10.1145/1835449.1835459 · Conference paper
Brown, L. D.; Cai, T. T.; DasGupta, A. (2001): Interval Estimation for a Binomial Proportion. Statistical Science 16 (2), pp. 101–133
Finding The usual confidence interval for proportions (Wald) is unreliable even with large samples. For small samples the authors recommend the Wilson interval.
In the tool The calculator checks outliers with the Wilson interval, so that rows with few impressions are not hastily flagged.
doi.org/10.1214/ss/1009213286 · Journal article
Standards, authorities and manufacturer data
- What are impressions, position, and clicks? (definitions, as of 14.11.2026) · Google Search Console Help
- Performance report (Search results): aggregation by site and page, provisional data · Google Search Console Help
- About Search Console data: privacy, 1,000 rows, delay, time zone · Google Search Console Help
- Troubleshooting data discrepancies: anonymised queries and totals · Google Search Console Help
- Bulk data export: tables and calculation of position · Google Search Console Help
- More and better data export in Search Console (26.02.2020) · Google Search Central Blog
- Google Organic CTR Study, data as of July 2026 (industry analysis, not peer reviewed) · Advanced Web Ranking
- Why (almost) everything you knew about Google CTR is no longer valid (14.07.2020, mobile only) · Sistrix
11 / MORE TOOLS
Still have a question?
- AT-W42 · Businesses
Snippet preview
How does your page appear on Google? Title and description with pixel width, for desktop and mobile. - AT-W43 · Businesses
Schema generator
Structured data for your business: LocalBusiness, opening hours and FAQ as JSON-LD, ready to paste in. - AT-W44 · Businesses
Business Profile check
Is your Google Business Profile complete? What is missing, sorted by impact. - AT-W45 · Businesses
NAP check
Are your name, address and phone number the same everywhere? Compare entries from directories. - AT-W46 · Businesses
Keyword sorter
Which search terms belong together, and what is the searcher after? Lists sorted by topic and search intent. - AT-W47 · Home & business
Readability check
How easy is your text to understand? Readability index for German, with long sentences and difficult words highlighted.
Do you have your list? Send us the CSV or the copied summary. We will look at the pages with the greatest potential and rework content, titles and internal links, for businesses in Rodewisch, in the Vogtland and beyond.
+49 3744 4399760[email protected]Mon–Fri 8:00–17:00 · Straße der Jugend 5, 08228 Rodewisch