Tool AT-W24REV. 2026-A

Battery check: how good is the battery of your laptop or phone?

Battery health is today’s full charge capacity divided by the capacity when new. Apple and Google design their batteries to retain 80 per cent after 500 to 1,000 charge cycles; below that the device lasts noticeably less time. The battery check reads the Windows battery report directly in the browser or takes the values from an iPhone, Mac or Android. It shows the history, estimates how things will develop and tells you whether a replacement is worthwhile.

  • free
  • no sign-up
  • File stays in the browser

Read in a report or enter values, read off the battery health

Test bench · Battery health

The battery check works with the values your device itself reports about the battery. These values are estimates by the battery electronics and can be off by a few per cent.

Step 1Which device is it?

For the Windows battery report: open Command Prompt, enter powercfg /batteryreport and read in the file battery-report.html here.

Step 2Read in the Windows battery report
  1. Press the Windows key, type cmd and open Command Prompt.
  2. Enter powercfg /batteryreport and confirm with Enter.
  3. Windows tells you where the file is saved, usually your user folder. Select the file battery-report.html here.

Step 3Or enter the values by hand

Battery health

—

No values yet

Read in the Windows battery report or enter your device’s values.

Assessment based on manufacturer figures (80 % remaining capacity as the design target); above 110 % the value is regarded as doubtful. As of 14 November 2026.

Reads and calculates in your browser. The file is not uploaded and nothing is stored.

Where your device shows its battery health

Every device with a lithium battery keeps a record of it. The battery electronics measure during charging and discharging how much energy fits in, and compare that with the value the manufacturer stored when it was built. Not all devices show it equally well, though. Windows hides it in a report, while Apple and Google show a percentage.

Where the values are found, as of 14 November 2026
DeviceWhere
Windows laptopFor the Windows battery report: open Command Prompt, enter powercfg /batteryreport and read in the file battery-report.html here.
MacBook, MacBook Air or Pro (from late 2009)System Settings > Battery: condition and “Maximum Capacity” (info icon). The cycle count: hold the Option key, Apple menu > System Information > Power.
iPhone up to iPhone 14Settings > Battery > Battery Health & Charging: “Maximum Capacity”.
iPhone 15 or newerSettings > Battery > Battery Health: “Maximum Capacity”; the cycle count is also shown there.
iPadOnly newer iPads show battery health under Settings > Battery. If the entry is missing, a workshop can read it out with a diagnostic program.
Google Pixel 3 to 8 Pro, Pixel FoldThese models do not show a percentage for battery health. Enter values by hand only if you have them from a workshop diagnosis.
Google Pixel 8a or newerSettings > Battery > Battery health > Battery capacity. The cycle count: Settings > About phone > Battery information.
Other Android phone or tabletDepending on the manufacturer under Settings > Battery or in the diagnostic app (on Samsung: Samsung Members). Not every device shows a percentage.

The Windows battery report, step by step

  1. Open Command Prompt. Press the Windows key, type “cmd”, press Enter. You do not need administrator rights.
  2. Enter powercfg /batteryreport. Windows tells you where the file battery-report.html is saved, usually in your user folder. With /output C:\Temp\akku.html you choose the location yourself; adding /xml gives you the same data as XML.
  3. Drag the file into the battery check above. It reads the report in the browser. You can also open it yourself; it is an ordinary web page.

The report is labelled in English even on German Windows. The numbers still follow the national format, so 60,000 mWh becomes 60.000 mWh. The tool copes with both, and also with laptops that have two batteries. The important sections:

Terms in the Windows battery report
In the reportMeaning
Installed batteriesThe installed batteries with name, manufacturer and cell chemistry (LiP, LION)
DESIGN CAPACITYCapacity when new, stored by the manufacturer
FULL CHARGE CAPACITYWhat fits in at full charge today, estimated by the battery electronics
CYCLE COUNTCounted charge cycles; a dash means the laptop does not report any
Battery capacity historyFull charge capacity per week or day since Windows was installed
Battery life estimatesEstimated battery life at full charge and when new (“Since OS install” = since the installation)

Structure checked against reports from Windows 10 and 11, as of 14 November 2026. Command and options: Microsoft Learn, Powercfg command-line options.

When a battery counts as worn out

The 80 per cent mark is no coincidence. Apple states for Mac, iPhone and iPad that the battery is designed to retain up to 80 per cent of its original capacity after a certain number of full charge cycles. On Pixel phones, Google shows the status “Reduced” below 80 per cent and advises replacement. For smartphones and tablets placed on the market from 20 June 2025, the EU requires at least 800 cycles at 80 per cent. In research too, 80 per cent is the usual measure for the end of life Preger et al. 2020.

80 per cent remaining capacity after this many full charge cycles
DeviceCyclesSource
MacBook, MacBook Air or Pro (from late 2009)1.000Apple Support
iPhone up to iPhone 14500Apple Support
iPhone 15 or newer1.000Apple Support
iPad1.000Apple
Google Pixel 3 to 8 Pro, Pixel Fold800Google Pixel Help
Google Pixel 8a or newer1.000Google Pixel Help
Other Android phone or tablet800European Commission, minimum for models from 20 June 2025

Older MacBooks up to late 2008 or mid 2009 are designed for 300 or 500 cycles. There is no uniform figure for Windows laptops. As of 14 November 2026.

A cycle here means one full charge, even in stages. If you use half a charge twice and top up in between, you have completed one cycle, not two. For Mac laptops with AppleCare, Apple replaces the battery free of charge if it falls below 80 per cent. That shows well where the manufacturers themselves draw the line.

How the battery check assesses battery health

Levels of battery health
Battery healthLevelWhat it means
90 % or moreBarely agedThe battery still has almost its full capacity. No action needed.
80 to under 90 %Normal ageingThe battery has lost capacity but is still above the 80 per cent that manufacturers design their batteries for.
70 to under 80 %Below the manufacturer’s targetThe battery is below 80 per cent. It works, but lasts noticeably less time. Plan a replacement when the battery life is no longer enough.
under 70 %Replacement recommendedLess than 70 per cent of the original capacity. From here the battery can decline faster than before, and the device is more likely to shut down unexpectedly under load.
over 110 %Value implausibleUsually the stored design capacity is wrong, for example with replacement batteries.

The 80 per cent figure comes from the manufacturers; the limits at 90 and 70 per cent are our experience from the workshop. Below 70 per cent we recommend a replacement even if the battery life is still enough. Batteries often last a long time at an even rate and then drop quickly at a knee, and some of the causes cannot be measured from outside Attia et al. 2022. As capacity is lost, internal resistance also rises Schmalstieg et al. 2014, and under heavy load the voltage collapses. That is why old batteries sometimes switch off suddenly at a 20 per cent reading.

Why the cycle count alone is not enough

In a test with 124 identical cells, all treated the same, the shortest lasted 150 and the longest 2300 cycles Severson et al. 2019. In daily use, heat, charge level and charging current come on top. The battery check therefore rates the measured capacity and uses the cycles only for context. If a battery has already lost a lot after few cycles, the result says so, because then heat or long periods at full charge were usually involved.

And one more thing: all displayed values are estimates. Determining the condition of a battery in operation precisely is difficult, and the methods used by battery electronics differ in accuracy Berecibar et al. 2016. Individual weeks fluctuate, and after a recalculation the value sometimes jumps up. What carries weight is the trend over months, and the Windows report supplies that too. In the example report the battery loses about 7.2 percentage points a year and is at 78.7 % today.

Why batteries age even when they are just lying around

A lithium-ion battery ages in two ways Vetter et al. 2005. During charging and discharging the electrodes wear down. And even in a cupboard, side reactions continue that gradually bind lithium, which is then missing for storage. Both depend on time and the charge passed through, intensified by temperature, charge level and cycle depth Schmalstieg et al. 2014.

When stored, the charge level matters most. Cells stored full lost considerably more capacity than half-full ones Keil et al. 2016 Ecker et al. 2014. Then there is heat: the loss during storage rises with temperature following the Arrhenius law Broussely et al. 2001; roughly speaking, every extra degree speeds up ageing.

In operation, cells age most slowly at around 25 °C. Above that it gets worse with every rise in temperature, and below it too Waldmann et al. 2014. At low currents, time and temperature determine the loss; at high currents the current adds to it Wang et al. 2011. A phone that charges quickly on the dashboard in summer therefore meets several unfavourable conditions at once.

100 %90 %80 %70 %60 %KNEEBARELY AGEDNORMAL AGEINGBELOW MANUFACTURER’S TARGETREPLACEMENT RECOMMENDEDTIME AND CHARGE CYCLES
Fig. 1 · Schematic, not a measurement: even loss, then a knee. When it happens is hard to predict from outside.

Charge limit, heat, cold: what really protects the battery

The main point first: a battery is a wear part, and a device is there to be used, not babied. A few habits still extend its life noticeably, and they cost almost nothing.

  • Charge limit, if the device is mostly plugged in. A battery that is permanently full ages faster than one at a medium charge level Keil et al. 2016. Many manufacturers therefore offer to stop at 80 per cent or lower. Apple and Google go further: Macs with an Apple chip lower the maximum charge themselves at times, and Pixel phones from the 6a onwards gradually adjust the charging voltage after about 200 cycles.
  • Avoid heat. No phone in the sun, no laptop on a bed or sofa where the vents get blocked. A laptop that gets loud and hot often just needs cleaning; what you can do yourself is covered in the guide Laptop gets loud and hot.
  • Warm it up first in the cold. Charging at sub-zero temperatures lets metallic lithium grow on the anode, which drastically shortens life and reduces safety. This also happens with fast charging at normal temperature Waldmann et al. 2018.
  • Fast charging only when in a hurry. High charging currents speed up the loss of capacity and power, especially in the cold Tomaszewska et al. 2019. Overnight, slow charging is enough.
  • Half full for storage. A device that lies in a drawer for months should be switched off at about half charge and stored cool Ecker et al. 2014.

What the charge limit is called on Windows laptops

Charge limit by manufacturer, according to manufacturer documentation
ManufacturerFunctionValues
LenovoLenovo Vantage: conservation mode or battery charge thresholdje nach Modell, beim Yoga 7 hält der Erhaltungsmodus 75 bis 80 %
DellDell Power Manager: battery settings “Primarily AC use” or “Custom”with “Custom” you set the start and stop of charging yourself
HPBattery Health Manager in the BIOS (business models) or Adaptive Battery Optimizer“Maximize my battery health” limits to about 80 %
ASUSMyASUS: Battery Health Charging60, 80 or 100 %
Microsoft SurfaceSurface app: Battery & charging, “Limit to 80 %” or Smart charging80 %

Which levels are available depends on the model and the BIOS. As of 14 November 2026.

And for phones, tablets and Macs

Charge limit on Apple, Google and Android
DeviceSetting
MacBook, MacBook Air or Pro (from late 2009)System Settings > Battery: “Optimized Battery Charging” or charge limit; on Macs with an Apple chip, Battery Health Management also runs.
iPhone up to iPhone 14Settings > Battery > Battery Health & Charging: switch on “Optimized Battery Charging”.
iPhone 15 or newerSettings > Battery > Charging: charge limit between 80 and 100 per cent in steps of 5.
iPadSettings > Battery: depending on the model, “Optimized Battery Charging” or a charge limit.
Google Pixel 3 to 8 Pro, Pixel Fold“Adaptive Charging” in the battery settings.
Google Pixel 8a or newer“Adaptive Charging” or charging optimisation in the battery settings. From about 200 cycles the Pixel also lowers the charging voltage itself; up to the Pixel 9 Pro Fold this can be switched off, from the Pixel 9a it is always on.
Other Android phone or tabletOn Samsung: Settings > Battery > Battery protection, option “Maximum” with a charge limit of 80 to 95 per cent. Other manufacturers call it battery protection or charging optimisation.

Replace the battery or buy a new device?

A weak battery is no reason for a new device. In phones and laptops alike it is the part that wears out first, and the rest of the device is as good afterwards as before. Field data from thousands of phone and tablet batteries also show that many are still in good shape after years Clemm et al. 2016. The example in the tool is a typical case: three years old, 412 cycles, 78.7 %. If the battery life is still enough for you, you can carry on using the device as it is. It is best to plan the replacement before the battery falls below 70 per cent.

It looks different when several things come together: the battery is weak, the device will soon stop getting updates, and the display has a crack. Whether a replacement still pays off is shown by Repair or buy new?, and what costs to expect for a repair is covered in the guide What does a PC repair cost?. We replace laptop batteries in our workshop; what that involves is described under Computer repair.

A swollen battery is an emergency

If the case bulges, the touchpad lifts or the device no longer lies flat, gas has formed in the battery. This happens when the electrolyte decomposes, and rapid ageing often goes with it Rowden and Garcia-Araez 2020. Then no percentage figure applies any more. Switch it off, do not charge it again, do not open it and do not press on it. Bring the device to us, or call: +49 3744 4399760.

Outlook: replaceable batteries from 2027

From 18 February 2027, the EU Batteries Regulation requires that portable batteries in new products can be “readily removed and replaced at any time during the lifetime of the product”, by the user themselves, using commercially available tools (Art. 11 of Regulation (EU) 2023/1542 (Batteries Regulation)). Exceptions (Art. 11 para. 2 as amended by Reg. (EU) 2026/1770, para. 3) apply to devices built for wet environments, certain medical devices, wearables, electric toys (until 31 July 2030), probes of food thermometers, devices for potentially explosive atmospheres, body-worn drug delivery systems and telematics on vehicle roofs, and also to devices that need uninterrupted power. For smartphones and tablets, battery replacement is instead governed by the Ecodesign Regulation (EU) 2023/1670. For your current device this changes nothing. But anyone buying new in the next few years should check whether the battery is available separately.

What the research says

The thresholds and tips in the battery check rest on 15 reviewed papers. The full list with findings and review notes is further down; here are the key statements.

  • Batteries age even when unused. High charge level and heat are the strongest drivers in storage Keil et al. 2016 Broussely et al. 2001. Hence the advice on a charge limit.
  • A battery is happiest at room temperature. Cells aged most slowly at around 25 °C; heat and cold both speed up ageing Waldmann et al. 2014.
  • The cycle count says little about condition. Identical cells lasted 150 to 2300 cycles Severson et al. 2019, and operating conditions shifted the time to 80 per cent by thousands of hours Preger et al. 2020.
  • The trend can tip. After a long even phase, many batteries decline quickly at a knee Attia et al. 2022. The forecast in the tool is therefore expressly an extrapolation and tends to be too favourable.
  • Measuring means estimating. The electronics can only determine how healthy a battery is approximately Berecibar et al. 2016. A value over months says more than a single one.

Using this tool from an AI assistant

Assistants such as Claude or ChatGPT that speak the Model Context Protocol (MCP) can call this page’s calculation directly instead of rebuilding it. The server is public, needs no sign-in and stores nothing. The answer always includes the link to this page, the date of the data and the limits of the result.

Endpoint
https://aureum-tech.com/mcp
Tool
werkzeug_akku_check
Transport
Streamable HTTP, read-only
Inputs
NameRequiredMeaning
geraetyesDevice: windows = Windows laptop; mac = MacBook, MacBook Air or Pro (from late 2009) (80 % after 1,000 cycles according to Apple); iphone-bis-14 = iPhone up to iPhone 14 (80 % after 500 cycles according to Apple); iphone-ab-15 = iPhone 15 or newer (80 % after 1,000 cycles according to Apple); ipad = iPad (80 % after 1,000 cycles according to Apple); pixel-bis-8 = Google Pixel 3 to 8 Pro, Pixel Fold (80 % after 800 cycles according to Google); pixel-ab-8a = Google Pixel 8a or newer (80 % after 1,000 cycles according to Google); android = other Android phone or tablet (80 % after 800 cycles according to the EU Ecodesign Regulation); sonstig = other device.
maximale_kapazitaet_prozentno“Maximum Capacity” or battery capacity in per cent, as shown by an iPhone, Mac or Pixel. Takes precedence over the capacities.
design_kapazitaetnoDesign capacity (when new) in mWh or mAh, same unit as volle_ladekapazitaet. In the Windows battery report “DESIGN CAPACITY”.
volle_ladekapazitaetnoToday’s full charge capacity in the same unit. In the Windows battery report “FULL CHARGE CAPACITY”.
zyklennoCharge cycles according to the device (“CYCLE COUNT”, “cycle count”). Optional.
aufgeblaehtnotrue if the battery visibly bulges (case or touchpad lifts). Then “out of service” applies immediately.
berichtnoOptional: the complete content of the file from “powercfg /batteryreport” (HTML) or “powercfg /batteryreport /xml” as text. Provides capacities, cycles, history with trend and the battery life estimate; serial number and computer name are not evaluated.

Questions where an assistant should call it

  • “According to the battery report, my laptop battery has 57,000 mWh design capacity and 41,000 mWh full charge capacity at 480 cycles. Is that bad?”
  • “My iPhone 13 shows 79 % maximum capacity. Should I have the battery replaced?”
  • “Here is my powercfg battery report: how fast is the battery losing capacity, and when will it reach 80 %?”
  • “Is a MacBook with 1020 charge cycles and 83 % maximum capacity still okay?”

How the connection works and what MCP can do in your own business is explained on the page about MCP integrations.

Common questions about the battery

How do I check the battery health of my laptop in Windows?

Open Command Prompt and enter “powercfg /batteryreport”. Windows saves the file battery-report.html in the current folder, usually your user folder. Under “Installed batteries” you will find DESIGN CAPACITY (when new) and FULL CHARGE CAPACITY (today). Full charge capacity divided by design capacity gives the battery health. The battery check reads the file directly in your browser and also evaluates the history.

At what percentage should you replace the battery?

Apple and Google design their batteries to retain 80 per cent after 500 to 1,000 charge cycles. Below that the device lasts noticeably less time, but it is not broken. We advise replacing it when the battery life no longer meets your daily needs, and at the latest below 70 per cent: from there the battery can decline faster, and devices are more likely to shut down unexpectedly under load.

What does the number of charge cycles mean?

A cycle is one full charge, even if it is used up in stages: two half charges make one cycle. Manufacturers state after how many cycles 80 per cent should remain: 500 for iPhones up to the iPhone 14, 1,000 from the iPhone 15 and for MacBooks. The cycle count alone says little, though. Even identical cells last between 150 and 2300 cycles in the lab, and heat and charge level count too.

Why does the battery report show more than 100 per cent or fluctuating values?

The capacity is an estimate made by the battery electronics. New batteries often have slightly more than stated, so 101 or 103 per cent is normal. The value varies by a percent or two from week to week, and after a recalculation it occasionally jumps up. Only above 110 per cent is the value doubtful, usually with replacement batteries that have a wrong design figure.

Does it harm the battery if the laptop is always plugged in?

A battery that is always full ages faster than one at a medium charge level, even when not in use. Heat inside the case adds to this. Most manufacturers therefore offer a charge limit, such as conservation mode on Lenovo, “Limit to 80 %” on Surface or Battery Health Charging on ASUS. On a device that mostly sits on a desk, it is worth switching it on.

What should I do if the battery swells?

Switch it off at once, do not charge it again, do not open it and do not press on the case. Gas has formed inside the battery; if it is damaged, it can catch fire. Leave the device somewhere non-flammable and take it to a workshop. You can hand it in with us in Rodewisch.

Is my file uploaded?

No. The browser reads the report with DOMParser on your device and does the calculation there. Nothing is sent to our server and nothing is stored. The tool does not even evaluate the computer name and serial number in the report.

Where does the battery check stop?

It works with the values the device reports about its battery and assesses them against manufacturer figures. Whether the battery can be replaced separately, which spare part fits and whether a fault in the device is behind it, we check on the device, on site in the Vogtland or in our workshop.

What the tool is based on

The guide values and notes above are based on these 15 scientific papers. Each one has been checked via its DOI or the publisher’s page (most recently on 14 November 2026): it exists, it has not been retracted, and its findings still hold for this question today.

  1. Vetter, J.; Novák, P.; Wagner, M. R. et al. (2005): Ageing mechanisms in lithium-ion batteries. Journal of Power Sources, 147 (1–2), pp. 269–281

    Finding Overview of the ageing mechanisms of lithium-ion batteries, during charging and discharging as well as when simply stored.

    In the tool Basis of the section “Why batteries age”: ageing through use and ageing through time.

  2. Broussely, M.; Herreyre, S.; Biensan, P. et al. (2001): Aging mechanism in Li ion cells and calendar life predictions. Journal of Power Sources, 97–98, pp. 13–21

    Finding Long-term storage tests on charged cells: the capacity loss at the negative electrode follows temperature according to the Arrhenius law, so it rises sharply with every increase in heat.

    In the tool Explains why heat also harms an unused battery, for example in a hot car.

  3. Keil, P.; Schuster, S. F.; Wilhelm, J. et al. (2016): Calendar Aging of Lithium-Ion Batteries: I. Impact of the Graphite Anode on Capacity Fade. Journal of The Electrochemical Society, 163 (9), pp. A1872–A1880

    Finding Stored at 16 charge levels from 0 to 100 per cent, cells lost capacity mainly at a high charge level; in between there are wide ranges with similar loss. High charge levels should be avoided in storage.

    In the tool Supports the advice on a charge limit for devices on mains power and on storing at about half charge.

  4. Waldmann, T.; Wilka, M.; Kasper, M. et al. (2014): Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study. Journal of Power Sources, 262, pp. 129–135

    Finding Cells were charged and discharged between −20 and 70 °C until below 80 per cent remaining capacity. Below 25 °C they aged faster with falling temperature, above it with rising temperature; slowest at around 25 °C.

    In the tool Backs the tips “Avoid heat” and “Warm it up first in the cold”.

  5. Ecker, M.; Nieto, N.; Käbitz, S. et al. (2014): Calendar and cycle life study of Li(NiMnCo)O2-based 18650 lithium-ion batteries. Journal of Power Sources, 248, pp. 839–851

    Finding 73 commercial cells in storage and cycling tests: charge level strongly determines ageing in storage, and cycle depth determines ageing in operation. The two paths age the cell in different ways.

    In the tool Explains why charge cycles alone do not determine condition and why charge level and cycle depth count too.

  6. Schmalstieg, J.; Käbitz, S.; Ecker, M. et al. (2014): A holistic aging model for Li(NiMnCo)O2 based 18650 lithium-ion batteries. Journal of Power Sources, 257, pp. 325–334

    Finding Ageing model from tests with over 60 cells: capacity loss and rising internal resistance depend on time and on the charge passed through, influenced by temperature, charge level and cycle depth.

    In the tool Supports the statement that a battery ages with time and with use, losing power as well as capacity because internal resistance rises.

  7. Wang, J.; Liu, P.; Hicks-Garner, J. et al. (2011): Cycle-life model for graphite-LiFePO4 cells. Journal of Power Sources, 196 (8), pp. 3942–3948

    Finding At low charge and discharge currents, mainly time and temperature determined the capacity loss, and depth of discharge less so. At high currents their influence clearly added to it.

    In the tool Supports the tip to charge slowly where there is no hurry, and the note on temperature.

  8. Tomaszewska, A.; Chu, Z.; Feng, X. et al. (2019): Lithium-ion battery fast charging: A review. eTransportation, 1, Art. 100011

    Finding The high currents of fast charging lower efficiency and speed up the loss of capacity and power. Charging at low temperature is a problem of its own.

    In the tool Backs the tips “Fast charging only when in a hurry” and “Warm it up first in the cold”.

  9. Waldmann, T.; Hogg, B.-I.; Wohlfahrt-Mehrens, M. (2018): Li plating as unwanted side reaction in commercial Li-ion cells – A review. Journal of Power Sources, 384, pp. 107–124

    Finding Metallic lithium that deposits on the anode during charging drastically shortens life and is a safety issue. It occurs not only in the cold but also with fast charging.

    In the tool Explains why a cold battery should warm up before it is charged.

  10. Severson, K. A.; Attia, P. M.; Jin, N. et al. (2019): Data-driven prediction of battery cycle life before capacity degradation. Nature Energy, 4 (5), pp. 383–391

    Finding 124 identical cells under fast charging lasted between 150 and 2300 cycles. Lifetime thus varies widely even for the same type and the same treatment.

    In the tool Explains why the tool rates the capacity and uses the cycle count only for context.

  11. Attia, P. M.; Bills, A.; Brosa Planella, F. et al. (2022): Review—“Knees” in Lithium-Ion Battery Aging Trajectories. Journal of The Electrochemical Society, 169 (6), Art. 060517

    Finding Batteries often last a long time at an even rate and then drop quickly and non-linearly at a “knee”. Several of the causes cannot be detected electrically from outside.

    In the tool That is why the tool calls the forecast from the trend “rather optimistic” and advises replacement below 70 per cent.

  12. Preger, Y.; Barkholtz, H. M.; Fresquez, A. et al. (2020): Degradation of Commercial Lithium-Ion Cells as a Function of Chemistry and Cycling Conditions. Journal of The Electrochemical Society, 167 (12), Art. 120532

    Finding Multi-year comparison of the cell chemistries LFP, NCA and NMC: even within manufacturer specifications, discharge current, depth of discharge and temperature changed the time to 80 per cent remaining capacity by thousands of hours and cycles.

    In the tool Supports the 80 per cent mark as the common measure and explains why two devices of the same age can be in very different shape.

  13. Berecibar, M.; Gandiaga, I.; Villarreal, I. et al. (2016): Critical review of state of health estimation methods of Li-ion batteries for real applications. Renewable and Sustainable Energy Reviews, 56, pp. 572–587

    Finding Estimating the state of health of a battery in operation accurately and reliably is difficult; the methods used by battery electronics differ in accuracy and effort.

    In the tool Backs the note that all displayed values are estimates and that the trend says more than a single value.

  14. Rowden, B.; Garcia-Araez, N. (2020): A review of gas evolution in lithium ion batteries. Energy Reports, 6, pp. 10–18

    Finding Gas forms in lithium-ion batteries, among other things when the electrolyte decomposes; with some electrode materials, rapid ageing goes together with gas formation.

    In the tool Explains what is behind a swollen battery and backs the level “out of service immediately”.

  15. Clemm, C.; Sinai, C.; Ferkinghoff, C. et al. (2016): Durability and cycle frequency of smartphone and tablet lithium-ion batteries in the field. 2016 Electronics Goes Green 2016+ (EGG), pp. 1–7

    Finding Field data from thousands of smartphone and tablet batteries: even after several years and hundreds of charge cycles, many remained in fairly good condition. The authors themselves clearly limit how far this can be generalised.

    In the tool Puts into context that a phone battery is often still good after a few years and that a replacement does not devalue the device.

Standards, authorities and manufacturer data

Mon–Fri 8:00–17:00

Is your battery below 80 per cent, or does the device switch off unexpectedly? Send us the copied result. We will tell you whether the battery is available for your model, and replace it in Rodewisch if it is worthwhile.

+49 3744 4399760[email protected]

Mon–Fri 8:00–17:00 · Straße der Jugend 5, 08228 Rodewisch

Enquire about a battery replacement
+49 3744 4399760Mon–Fri 8:00–17:00
CallCallback

PARTS LIST · SHEET 1/1

What this page is made of

Values measured at build time. With JavaScript, your browser measures them again live.

ITEMPARTTYPESIZE
01index.htmlDocument≈ 29 kB
02styles.cssStylesheet≈ 20 kB
03scripts.jsScript≈ 13 kB
04archivo-variable.woff2Font≈ 58 kB
05ibm-plex-mono.woff2Font≈ 30 kB
06favicon.svgImage< 1 kB

Advertising or analytics cookies: none. Without your consent, the page loads nothing from third-party servers apart from Cloudflare, our delivery service. Fonts, scripts and images are hosted by us. That is how we build your IT, too.

OUTSIDE OFFICE HOURS

Feel free to call anyway

Our regular office hours are Monday to Friday, 8:00–17:00.

In the evening and at weekends the number is forwarded to us, and often someone will pick up. We cannot promise that, though.

If nobody answers, leave a short message on the voicemail: your name, your number and what it is about. We will call back as soon as we can, on the next working day at the latest.

The call costs nothing. If someone has to start work straight away outside office hours, the surcharge in the price list applies.

Call now+49 3744 4399760

Prefer to write? Use the contact form or e-mail [email protected]. We will read it on the next working day.

DIAGNOSIS · AT-K2

What do you need help with?

↵ SELECTESC CLOSECALL: +49 3744 4399760

Custom settings

Which services may load?

Strictly necessary

The choice you make here and your settings for colour scheme and motion. These are kept as small entries on your device and are never sent to a server. They are needed for the site to work and therefore cannot be switched off.