Tool AT-W28REV. 2026-A

Erasing data before you sell or dispose of a device: how to make sure it is really gone

Emptying the recycle bin and formatting are not enough; the data stays readable. It is only gone once the whole drive has been overwritten, erased with its built-in command or its key destroyed; on a phone, the factory reset does this once you have signed out. The assistant gives the method for your device step by step, with sources, and creates an erasure record to print.

  • free
  • no sign-up
  • runs in the browser

Choose a device, read off the method, print the record

Assistant · method and erasure record

The assistant gives the usual method for your device, based on manufacturers’ information, NIST SP 800-88 and BSI baseline protection. Menus change with every update; what your device shows is what counts. It erases nothing itself.

Question 1Which device is it?
Question 2What will happen to the device?
Question 3What data was on it?

This determines whether erasing is enough or the drive must be destroyed, and which level of DIN 66399 applies.

Question 4Does the device still work?

Your method

—

Choose the device, what happens to it and the type of data.

For the record, optionalWhich device exactly?

These details appear only in the record below. If left blank, fill them in by hand after printing.

Erasure record · drives and devices

Proof of erasure

Device
Make and model
Serial number
Inventory number
Reason
Protection requirement
Condition
Method
Technique
Tool and version

Done

Result of the check
Destruction certificate no.
Carried out by, position
Place, date
Signature
Checked by (for business data)
Date
Signature

Details according to NIST SP 800-88 Rev. 2, section 4.6. Created with the Data Erasure Assistant of Aureum Technology GmbH, aureum-tech.com/tools/daten-loeschen, as of 14 November 2026.

It runs in your browser. Nothing is sent or stored.

Why deleting and formatting are not enough

Deleting a file and emptying the recycle bin only removes its entry from the table of contents. The space is released for overwriting, but the data itself stays where it is until something else is written over it. A quick format is the same thing on a large scale. With freely available programs, a drive like this can be searched in minutes.

How often this happens has been well studied. Of 129 second-hand hard drives that could be read, only 12 had been completely overwritten; on 42 there were number sequences that looked like card numbers Garfinkel and Shelat 2003. A research series spanning several years and countries reached the same result again and again, for private individuals and businesses alike Jones et al. 2010. All 49 second-hand phones examined gave up data from their previous owners Glisson et al. 2011, and 67 of 100 used memory cards still held personal data Jones et al. 2019.

Whether data is really gone depends on the level at which it is erased Reardon et al. 2013. Securely erasing a single file is barely possible on today’s drives. The assistant therefore always works with the whole drive: overwrite it, trigger the built-in erase command, destroy the key or destroy the drive.

DIRECTORYVISIBLE AREASSD RESERVERecycle bin, quick formatONLY THE ENTRYGONEREADABLEREADABLEOverwrite completelyCLEARGONEGONEREADABLESecure Erase, SanitizePURGEGONEGONEGONECryptographic erasePURGE, KEY GONEENCRYPTEDENCRYPTEDENCRYPTEDDestroyDESTROYGONEGONEGONEHARD DRIVES HAVE NO RESERVE: FULL OVERWRITING IS ENOUGH THERE.

Fig. 1 · Readable (hatched), erased (empty) and present only in encrypted form (dotted), for each method. Classification according to NIST SP 800-88 Rev. 2.

A drive that leaves your premises should therefore never be erased file by file. If you only want to keep using a computer, the guide Moving your data to the new PC explains what has to be copied across first. How to dispose of old equipment free of charge in the Vogtland and when an old device is still worth keeping is covered in the guide Getting rid of an old PC and in the tool Repair or buy new?.

Clear, Purge, Destroy: the three levels under NIST

The most widely used guideline for erasing storage media is NIST SP 800-88 from the US standards institute. In September 2025 Revision 2 replaced the 2014 version. It keeps the three levels but no longer names the technique for each type of drive itself, referring instead to the IEEE 2883 standard. The levels differ in whom they protect against.

Methods according to NIST SP 800-88 Rev. 2
LevelIn the assistantProtectsTypical technique
ClearOverwriting at user levelagainst recovery with ordinary programsOverwrite the hard drive completely, reset the device to factory settings
PurgeErasing down to the reserve areasalso against laboratory methods; the device stays usableSecure Erase, NVMe Sanitize, cryptographic erase
DestroyDestroyagainst laboratory methods; the drive is unusable afterwardsShredding or crushing to DIN 66399

According to NIST SP 800-88 Rev. 2, section 3, as of 14 November 2026.

The guideline advises choosing Purge rather than Clear wherever possible. This matches the research: the erase command built into the drive achieves more than any program that overwrites from outside, and destroying remains the most secure Hughes et al. 2009. The assistant therefore chooses the built-in command or cryptographic erase wherever the device can do it, and overwriting only where that is enough.

Cryptographic erase: fast, but only under one condition

If all the data is on the drive in encrypted form, it is enough to destroy the key. That takes seconds. iPhones, current Android devices and Macs with an Apple chip or T2 always encrypt their storage, which is why their factory reset is a cryptographic erase. The condition is stated explicitly in NIST SP 800-88: plain text must never have been on the drive. If you switch on BitLocker or FileVault only shortly before selling, old remnants are left unencrypted in the spare cells. The built-in hardware encryption of some SSDs is not a reliable sole safeguard either; on many of the models tested the content could be recovered without a password Meijer and van Gastel 2019.

Which method for which device

The table shows what the assistant suggests for each device. Before every method comes backing up and signing out of accounts, and afterwards the check and the record; the assistant above gives the individual steps.

Erasure method by device, as the assistant suggests it
DevicePersonal, sellingBusiness, sellingBusiness, disposingFaulty
Windows PC or laptopSSD erase command via BIOS or manufacturer’s tool, then reinstall Windows PurgeSSD erase command via BIOS or manufacturer’s tool, then reinstall Windows PurgeRemove the drive, keep it or destroy it to DIN 66399 DestroyRemove the drive, keep it or destroy it to DIN 66399 Destroy
MacErase assistant “Erase All Content and Settings” (cryptographic erase) PurgeErase assistant “Erase All Content and Settings” (cryptographic erase) PurgeErase assistant “Erase All Content and Settings” (cryptographic erase) PurgeDestroy to DIN 66399 Destroy
iPhone or iPadFactory reset “Erase All Content and Settings” (cryptographic erase) PurgeFactory reset “Erase All Content and Settings” (cryptographic erase) PurgeFactory reset “Erase All Content and Settings” (cryptographic erase) PurgeDestroy to DIN 66399 Destroy
Android phone or tabletFactory reset (cryptographic erase) PurgeFactory reset (cryptographic erase) PurgeFactory reset (cryptographic erase) PurgeDestroy to DIN 66399 Destroy
Hard drive (HDD)Overwrite completely, one pass ClearOverwrite completely with random values ClearDestroy to DIN 66399 DestroyDestroy to DIN 66399 Destroy
SSD, SATA or NVMeSSD Secure Erase or Sanitize PurgeSSD Secure Erase or Sanitize PurgeDestroy to DIN 66399 DestroyDestroy to DIN 66399 Destroy
USB stick or memory cardFull format ClearDestroy to DIN 66399 DestroyDestroy to DIN 66399 DestroyDestroy to DIN 66399 Destroy
Printer or copier with storageBuilt-in erase function with overwriting ClearBuilt-in erase function with overwriting ClearDestroy to DIN 66399 DestroyDestroy to DIN 66399 Destroy
NASReset the system, overwrite the drives one by one ClearReset the system, overwrite the drives one by one with random values ClearDestroy to DIN 66399 DestroyDestroy to DIN 66399 Destroy
RouterLoad factory settings, then change the access credentials ClearLoad factory settings, then change the access credentials ClearLoad factory settings, then change the access credentials ClearDestroy to DIN 66399 Destroy

For Windows and Macs, select “don’t know” for type and encryption if you are unsure; with more precise details the method is often simpler. Business here means customer, staff or accounting data.

Hard drives and SSDs are erased differently

Hard drive: one overwrite is enough

A classic hard drive writes every block exactly where the operating system sends it. Overwriting it completely therefore catches everything. One pass is enough; tests on today’s drives have disproved the assumption that 7 or even 35 passes are needed Wright et al. 2008.

On Windows, a full format without “Quick Format” has overwritten every sector of the volume with zeros since Windows Vista (Microsoft). For business data the BSI requires random values; the command format X: /fs:ntfs /p:1 does this, writing zeros first and then one pass of random values (Microsoft). On a Mac, Disk Utility offers “Security Options” for hard drives (Apple).

SSD: the built-in command

An SSD distributes the data across its memory cells itself and holds spare cells in reserve that the operating system cannot see. Overwriting does not reliably reach these cells; in one measurement even overwriting twice was not enough on every model Wei et al. 2011. The same measurement showed that the built-in erase commands work but are not implemented correctly everywhere: one SSD reported success and all the data was still there.

Conversely, SSDs sometimes tidy up erased areas by themselves without a command Bell and Boddington 2010. You cannot rely on it in either direction. So the rule is: Secure Erase or, for NVMe, Sanitize, using the manufacturer’s tool or the BIOS (Dell, HP, Lenovo), followed by a spot check for business data.

Windows: “Clean data” when resetting

Windows has its own erase function: Settings > System > Recovery > Reset this PC, then “Remove everything” and, in the additional settings, the “Clean data” option (Microsoft). For a hard drive, and for an SSD that has run with BitLocker or device encryption from the start, this is the simplest method for personal data. Microsoft itself states, however, that this function is aimed at consumers and does not meet government or industry standards. For business data the assistant therefore gives the BIOS erase command followed by a fresh installation.

Phone and tablet: sign out first, then reset

With a phone, the order is decisive. If you reset first without signing out, you pass on a locked device: Activation Lock stays on for an iPhone, while Android device protection remains active, and the buyer cannot set up the device. Signing out alone is not enough either, because the data then stays on the device.

  1. iPhone and iPad. Unpair the Apple Watch, sign out under Settings > your name, then Settings > General > Transfer or Reset iPhone > Erase All Content and Settings. Finally, remove the device from the list of trusted devices in your Apple Account (Apple).
  2. Android. Remove the Google account under Settings > Accounts, and on Samsung the Samsung Account too (Samsung). Then reset; on a Pixel under System > Reset options > Erase all data (Google). Take out the SIM and memory card first.

The factory reset works today because of encryption. Early tests still found photos and documents after the reset, especially on Android Schwamm and Rowe 2014. On devices running Android 11 and 12, by contrast, only encrypted remnants and a few traces of use were left Blankesteijn et al. 2023. For personal data that is enough. For professional secrets the assistant advises against passing the device on.

In its baseline protection the BSI requires a factory reset for smartphones and recommends going through the setup process once afterwards, so that the erasure is completed (CON.6.A12).

Printers, NAS and routers: data nobody thinks of

  • Copiers and multifunction devices. Many store scanned and printed pages, address books and credentials on a drive of their own, a hard drive or SSD. It is erased with the function in the device, on Canon for example “Initialize All Data/Settings” with overwriting; afterwards the device prints a report (Canon). If the function is missing, the drive is removed and erased like a hard drive or destroyed, as the BSI requires for built-in drives.
  • NAS. In a RAID, every drive holds parts of your data. The system’s factory reset removes accounts and shares, but it does not guarantee that the drives are overwritten (Synology). So you erase the drives one by one, or pass the NAS on empty. How much space a new NAS needs is worked out by the NAS and RAID calculator.
  • Router. It stores internet access credentials, Wi-Fi passwords and phone access details. Second-hand routers have been found to hold personal and confidential data of their previous owners Szewczyk 2011. The method therefore includes the factory settings, on a FRITZ!Box under System > Backup > Factory Settings (FRITZ!), and afterwards new access credentials from your provider. For IoT devices the BSI explicitly requires both, and a router is no different.

Destroying to DIN 66399: which level for which data

If a drive is broken, business data must be gone for certain, or the device is going for scrap anyway, it must be destroyed. How thoroughly is set out in DIN 66399, continued internationally as ISO/IEC 21964. It divides data into three protection classes and, for each material class, has seven security levels. Two classes matter for drives: H for hard drives and E for electronic storage, that is SSDs, USB sticks, memory cards and phone storage. A hard drive destroyed to level 4 is therefore H-4.

Security levels under DIN 66399
LevelForRecovery
1General dataReproduction without special aids, but with some effort
2Internal dataonly with aids and special effort
3Sensitive and confidential dataonly with considerable effort in terms of aids, time and staff
4Particularly sensitive and confidential dataonly with exceptionally high effort
5Data to be kept secretonly with uncommon commercial equipment and forensic methods
6Data to be kept secret, with exceptionally high precautionsnot possible according to the state of the art
7Data to be kept strictly secretnot possible according to the state of science and technology
Your data and the minimum level
DataClassfrom level
Personal: photos, e-mails, bank statements13
Business: customer, staff or accounting data24
Professional secrecy: patient, client or health data35

Levels paraphrased and allocation according to the guidance of the Data Protection Commissioner of Mecklenburg-Vorpommern. Particle sizes for each level appear only in the standard. Level 3 applies here to your own personal data; for other people’s personal data, such as that of customers or employees, supervisory authorities do not always consider it sufficient. That is what the “Business” row is for.

The BSI sets the lower limit for broken and built-in drives at level 3, that is H-3 or E-3 (CON.6.A12 and A13). A disposal firm that works to DIN 66399 confirms the destruction with a certificate; attach it to the record. At home, for a hard drive, it is enough to drill through the casing and platters several times. For SSDs, sticks and cards this barely achieves the aim, because the data sits in individual memory chips and flash cells even carry traces after erasure Skorobogatov 2005; there, every chip must be destroyed. Memory cards are, in practice, passed on especially carelessly Szewczyk et al. 2018; with business data they belong in destruction.

What the law and baseline protection require

  • Electrical Equipment Act (ElektroG). Old devices do not belong in household waste. Remove beforehand batteries that are not enclosed by the device and removable lamps (§ 10 para. 1 ElektroG). Larger electrical retailers take back up to three small devices of each type even without a new purchase (§ 17). The Act expressly calls erasing the data the responsibility of the end user (§ 18, for businesses § 19a).
  • General Data Protection Regulation (GDPR/DSGVO). Personal data that is no longer needed must be erased (Art. 17), using suitable measures (Art. 32). The business must be able to prove this (Art. 5 para. 2); that is what the record is for. If a service provider erases for you, a data processing agreement is needed (Art. 28, EUR-Lex).
  • BSI baseline protection. The module CON.6 requires a rule on who erases what and how, minimum methods for each type of drive and, with external service providers, a secure, traceable process. For businesses without their own IT department this is the best template.
  • Retention periods. You may only erase what no longer has to be kept. The retention period calculator shows which periods apply to invoices, receipts and personnel records. When an employee joins or leaves, the guide An employee joins or leaves helps with the rest.

If data from a broken device is still needed, data recovery comes first and destruction afterwards. We procure and set up new equipment for businesses through hardware ordering and workstation support; we erase the old devices at the same time.

Using this tool from an AI assistant

Assistants such as Claude or ChatGPT that speak the Model Context Protocol (MCP) can call this page’s calculation directly instead of rebuilding it. The server is public, needs no sign-in and stores nothing. The answer always includes the link to this page, the date of the data and the limits of the result.

Endpoint
https://aureum-tech.com/mcp
Tool
werkzeug_daten_loeschen
Transport
Streamable HTTP, read-only
Inputs
NameRequiredMeaning
geraetyesWhich device or drive: windows = Windows PC or laptop; mac = Mac; iphone = iPhone or iPad; android = Android phone or tablet; hdd = hard drive (HDD); ssd = SSD, SATA or NVMe; stick = USB stick or memory card; drucker = printer or copier with storage; nas = NAS; router = router.
bauartnoOptional, only for Windows and Mac: what is built in (windows: ssd, hdd, unbekannt; mac: apple-chip, intel-alt, unbekannt). Without a value it is “unbekannt” (unknown), and the answer then covers both cases.
verschluesseltnoOptional: was the drive encrypted from the start (BitLocker, device encryption, FileVault)? ja (yes), nein (no) or unbekannt (unknown, the default). Has no effect for phones, printers and routers.
zielyesWhat happens to the device: verkaufen = sell; verschenken = give away; entsorgen = dispose of; leasing = return.
schutzbedarfnoOptional: normal = personal data (default), hoch = business with customer, staff or accounting data, sehr-hoch = professional secrets such as patient or client data.
zustandnoOptional: geht (works, the default) or defekt (faulty: does not start or the drive is not recognised).

Questions where an assistant should call it

  • “I want to sell my old iPhone. What do I need to do first so that my data is gone?”
  • “How do I securely erase the SSD in my Windows laptop before I give it away?”
  • “Our company is returning leased laptops. How do we erase the data in a way we can prove?”
  • “Is the factory reset on the FRITZ!Box enough before I sell it on Kleinanzeigen?”
  • “An old hard drive no longer starts. Can I simply take it to the recycling centre?”

How the connection works and what MCP can do in your own business is explained on the page about MCP integrations.

Common questions about erasing and disposal

Is it enough to format the hard drive?

A quick format is not enough. It only rebuilds the table of contents; the data stays readable until it is overwritten. In one study, of 129 second-hand hard drives that could be read, only 12 had really been overwritten. With a hard drive, a full format without “Quick Format”, which writes zeros to every sector since Windows Vista, helps. With an SSD, even that is not reliable.

How do I wipe an SSD safely?

Use its built-in erase command: Secure Erase or, for NVMe, Sanitize. You can trigger it with the SSD manufacturer’s software or with the erase function in the BIOS of many business laptops. Overwriting is no substitute, because an SSD has spare cells that overwriting cannot reach. If the SSD was encrypted with BitLocker or FileVault from the start, such remnants exist only in encrypted form.

How many times do I need to overwrite a hard drive?

Once, completely. The 7 or 35 passes often quoted date from the days of older recording methods; tests on today’s drives show that one pass is enough. For businesses, the BSI (German Federal Office for Information Security) requires unencrypted drives to be overwritten completely with random values. On Windows this works with format and the switch /p:1.

What do I need to do with an iPhone before selling it?

Back up, unpair the Apple Watch, sign out of your Apple Account under Settings > your name, and then choose “Erase All Content and Settings” under Settings > General > Transfer or Reset iPhone. This destroys the keys with which the iPhone encrypts everything and switches off Activation Lock. Finally, remove the device from the list of trusted devices in your Apple Account.

Why do I have to remove the Google account before resetting?

Because of Android’s device protection. If a Google account is signed in, the phone asks for its password after the reset, and without it the phone cannot be set up. Remove the account under Settings > Accounts, and on Samsung also the Samsung Account. If you have just changed the password, wait 24 hours.

What do I do with a broken hard drive?

Keep it or have it destroyed. A drive that no longer responds has not been erased; laboratory methods can often still get at the data. For broken drives the BSI requires at least security level 3 of DIN 66399, that is H-3 for hard drives and E-3 for SSDs. At home, for a hard drive, several holes drilled right through the casing and platters are enough.

Does my printer have a hard drive?

Office devices with scan-to-folder, document storage or fax often have a hard drive or SSD; the data sheet or manual will say. It is erased with the built-in function, on Canon for example “Initialize All Data/Settings” with overwriting. Afterwards you change the passwords that were stored in the device, for example for scan-to-email.

Does my business need an erasure record?

Yes, it always makes sense. Under the GDPR (DSGVO) a business must be able to prove that it has erased personal data (Art. 5 para. 2), and the BSI requires a traceable procedure. The assistant’s record contains the details that NIST SP 800-88 lists for proof of erasure: device, serial number, method, tool, check, name and signature.

Where does the Data Erasure Assistant stop?

It gives the usual method according to manufacturers’ information, NIST SP 800-88 and BSI baseline protection, but erases nothing itself. Menus change with updates, and whether an erase command has been carried out properly inside a device cannot be checked from outside. If you are retiring many devices, returning leased equipment or need proof, we erase the drives for you, on site in the Vogtland or at our office in Rodewisch, and give you the record.

What the tool is based on

The guide values and notes above are based on these 15 scientific papers. Each one has been checked via its DOI or the publisher’s page (most recently on 14 November 2026): it exists, it has not been retracted, and its findings still hold for this question today.

  1. Garfinkel, S. L.; Shelat, A. (2003): Remembrance of data passed: a study of disk sanitization practices. IEEE Security & Privacy 1 (1), pp. 17–27

    Finding Of 158 second-hand hard drives bought, 129 could be read. Only 12 of these had been completely overwritten; most had merely been formatted or not erased at all, and on 42 there were digit sequences that looked like card numbers.

    In the tool Supports the rule of thumb that formatting does not erase, and why the assistant always calls for overwriting, an erase command or destruction.

  2. Jones, A.; Valli, C.; Dardick, G. et al. (2010): The 2009 Analysis of Information Remaining on Disks Offered for Sale on the Second Hand Market. Journal of Digital Forensics, Security and Law

    Finding Fifth round of a multi-year series with second-hand hard drives from several countries: businesses and private individuals alike kept passing on drives with readable data, some of it current, apparently not knowing what was on them.

    In the tool Shows that data remnants on second-hand devices are no isolated case; that is why the assistant applies to private individuals and businesses alike.

  3. Wright, C.; Kleiman, D.; Sundhar R. S., S. (2008): Overwriting Hard Drive Data: The Great Wiping Controversy. Information Systems Security (ICISS 2008), Lecture Notes in Computer Science 5352, pp. 243–257

    Finding Tests on hard drives disprove the widespread assumption that overwritten data can be recovered and that 7 to 35 passes are needed. One complete pass makes the old data practically unreadable.

    In the tool For hard drives the assistant recommends one complete pass instead of many, saving hours.

  4. Hughes, G. F.; Coughlin, T.; Commins, D. M. (2009): Disposal of Disk and Tape Data by Secure Sanitization. IEEE Security & Privacy 7 (4), pp. 29–34

    Finding The Secure Erase command built into the drive erases more thoroughly than overwriting software working from outside; destruction offers the highest protection. Drives with built-in encryption erase through the key in milliseconds.

    In the tool This gives the order in the assistant: built-in erase command or cryptographic erase before overwriting, destruction for the highest protection requirement.

  5. Wei, M.; Grupp, L. M.; Spada, F. E.; Swanson, S. (2011): Reliably Erasing Data From Flash-Based Solid State Drives. 9th USENIX Conference on File and Storage Technologies (FAST ’11), San Jose

    Finding The researchers read the memory chips of SSDs directly. The built-in erase commands worked but were not implemented correctly on every model; one SSD reported success and all the data was still there. Overwriting completely twice was usually enough, but not always; individual files could not be erased securely this way at all.

    In the tool For SSDs the assistant gives the built-in command as the method and overwriting only as a fallback, and for business data advises a spot check after erasing.

  6. Bell, G.; Boddington, R. (2010): Solid State Drives: The Beginning of the End for Current Practice in Digital Forensic Recovery?. Journal of Digital Forensics, Security and Law

    Finding SSDs tidy up erased areas by themselves, without a command from the computer, and in doing so destroy remnants that would have survived on hard drives. What is still on an SSD after erasing can therefore not be predicted.

    In the tool The assistant does not rely on an SSD removing remnants by itself and requires an erase command for the whole drive.

  7. Skorobogatov, S. (2005): Data Remanence in Flash Memory Devices. Cryptographic Hardware and Embedded Systems (CHES 2005), Lecture Notes in Computer Science 3659, pp. 339–353

    Finding Examined on microcontrollers: in flash memory cells a remnant of the charge stays behind after erasing. This makes it possible to tell previously written cells from unwritten ones and to partly recover content from “erased” memory.

    In the tool Explains why, for flash memory holding professional secrets, destroying the chips is recommended and drilling is not enough.

  8. Meijer, C.; van Gastel, B. (2019): Self-Encrypting Deception: Weaknesses in the Encryption of Solid State Drives. 2019 IEEE Symposium on Security and Privacy, pp. 72–87

    Finding On many SSD models from three manufacturers the built-in hardware encryption could be bypassed and the content recovered without a password. BitLocker at the time relied on this encryption if the SSD offered it.

    In the tool The assistant gives encryption as a safeguard only if it was active from the start, and still recommends the erase command for business data.

  9. Reardon, J.; Basin, D.; Capkun, S. (2013): SoK: Secure Data Deletion. 2013 IEEE Symposium on Security and Privacy, pp. 301–315

    Finding Overview of erasure methods at all levels from the program down to the drive: whether erased data is really gone depends on the level at which it is erased. Tests showed that many methods rest on assumptions that do not hold in practice.

    In the tool That is why the assistant always works with the whole drive and never with erasing individual files.

  10. Glisson, W. B.; Storer, T.; Mayall, G. et al. (2011): Electronic retention: what does your mobile phone reveal about you?. International Journal of Information Security 10 (6), pp. 337–349

    Finding All 49 second-hand phones examined, from a pawn shop and an online auction, gave up data from their previous owners, 11,135 entries in all. The paper concludes that considerable personal data remains on a typical second-hand phone.

    In the tool Explains why, for phones, the assistant insists on a full reset and why signing out alone is not enough.

  11. Schwamm, R.; Rowe, N. C. (2014): Effects of the Factory Reset on Mobile Devices. Journal of Digital Forensics, Security and Law

    Finding First systematic test of the factory reset on 21 iPhones, Android and BlackBerry devices: a lot was erased, but individual data remained on every device, on Android including photos and documents.

    In the tool Shows why a factory reset only becomes reliable with encryption; for old phones without encryption the assistant advises destruction for business data.

  12. Blankesteijn, M. B.; Fukami, A.; Geradts, Z. J. M. H. (2023): Assessing data remnants in modern smartphones after factory reset. Forensic Science International: Digital Investigation 46, Art. 301587

    Finding On devices running Android 11 and 12, parts of the encrypted data remained in binary form after the factory reset, and some areas were not reset, so that traces of use could be derived.

    In the tool The assistant calls the factory reset sufficient for personal data and, for professional secrets, advises not passing the device on.

  13. Szewczyk, P. (2011): Analysis of Data Remaining on Second Hand ADSL Routers. Journal of Digital Forensics, Security and Law

    Finding A router can store credentials for the internet connection and usage habits. Second-hand routers were found to hold personal and confidential data of previous owners who had not removed it before selling.

    In the tool That is why the router method includes changing the access credentials with the provider as well as the factory reset.

  14. Jones, A.; Angelopoulou, O.; Noriega, L. (2019): Survey of data remaining on second hand memory cards in the UK. Computers & Security 84, pp. 239–243

    Finding On 67 of 100 second-hand SD and microSD cards bought, personal or sensitive data was found. On many there was no sign that the seller had even tried to erase them.

    In the tool Supports the separate method for sticks and cards and the advice to take cards out of phones, cameras and dashcams before passing them on.

  15. Szewczyk, P.; Sansurooah, K.; Williams, P. A. H. (2018): An Australian Longitudinal Study Into Remnant Data Recovered From Second-Hand Memory Cards. International Journal of Information Security and Privacy 12 (4), pp. 82–97

    Finding Second-hand memory cards bought over five years (2011 to 2015) were analysed: they were consistently passed on insecurely, with private, confidential and business data that had not been erased or was easy to recover.

    In the tool Together with Jones et al. 2019, supports the view that memory cards holding business data should be destroyed, not passed on.

Standards, authorities and manufacturer data

Mon–Fri 8:00–17:00

Many devices at once, a lease return or proof for your records? We erase hard drives, SSDs and phones on site or at our office in Rodewisch, recover first what you want to keep, and give you the record.

+49 3744 4399760[email protected]

Mon–Fri 8:00–17:00 · Straße der Jugend 5, 08228 Rodewisch

Request data wiping
+49 3744 4399760Mon–Fri 8:00–17:00
CallCallback

PARTS LIST · SHEET 1/1

What this page is made of

Values measured at build time. With JavaScript, your browser measures them again live.

ITEMPARTTYPESIZE
01index.htmlDocument≈ 29 kB
02styles.cssStylesheet≈ 20 kB
03scripts.jsScript≈ 13 kB
04archivo-variable.woff2Font≈ 58 kB
05ibm-plex-mono.woff2Font≈ 30 kB
06favicon.svgImage< 1 kB

Advertising or analytics cookies: none. Without your consent, the page loads nothing from third-party servers apart from Cloudflare, our delivery service. Fonts, scripts and images are hosted by us. That is how we build your IT, too.

OUTSIDE OFFICE HOURS

Feel free to call anyway

Our regular office hours are Monday to Friday, 8:00–17:00.

In the evening and at weekends the number is forwarded to us, and often someone will pick up. We cannot promise that, though.

If nobody answers, leave a short message on the voicemail: your name, your number and what it is about. We will call back as soon as we can, on the next working day at the latest.

The call costs nothing. If someone has to start work straight away outside office hours, the surcharge in the price list applies.

Call now+49 3744 4399760

Prefer to write? Use the contact form or e-mail [email protected]. We will read it on the next working day.

DIAGNOSIS · AT-K2

What do you need help with?

↵ SELECTESC CLOSECALL: +49 3744 4399760

Custom settings

Which services may load?

Strictly necessary

The choice you make here and your settings for colour scheme and motion. These are kept as small entries on your device and are never sent to a server. They are needed for the site to work and therefore cannot be switched off.